I hope everyone had a great Christmas! We did. New Years is on the way!

I had a dislocated rib put back in last physical therapy session. Let's just say, I am not feeling the desire to go through a lot of those.

Some good news along those lines. I am nearly done with the twice a week sessions. The knotted up muscles are becoming un-knotted(is that a word?). Getting time to get after the ligaments. My understanding is that getting them moving again is not going to be fun.

So now the proper exercise to regain support after they are broke loose is about to start. Whatever it takes. I know I have a ways to go, but seeing progress is very helpful.

So Christmas....well? I am not going to bore you with a play-by-play. But Vivian is always going bananas over puppy dogs. I got her a couple for Christmas.

They are quite large for slippers. Sheepdog slippers, I believe they called them.

The bed is too high for Vivian to get in and out of easily.

 I made her a  stool. It is 16 inches tall. She can get in and out of bed like a big girl now! The picture doesn't really show it, but the base is much wider than the top. It is also built out of 3\4 inch wood. It will not break easily. I weigh 240 pounds. I jumped up and down on it.

One of the things I have been trying to decide is what woodworking tools belong on a boat. I have decided that I will pick up a wormdrive circular saw to mount under a table as a table saw. I will make one end of that table into a router table. I already have a jigsaw mounted upside down to use in router table as a makeshift bandsaw. Today I finished a drill press.

Maybe you can see how it works from the picture.
I really do not have a large need for a real drill press, but on occasion I need to drill squarely into something. I also have to make large holes.

The 4 inch hole you see is a practice hole for the dorade boxes I need to start soon. These are the ones I have decided on. I was curious how well that heavy, out of balance, adjustable bit was going to work. It does, but I think it will knock the bearings out of the drill if I use it a lot.

Always something happening. I don't put all of it on here, but there is always something going on. If not a project, one is being planned. Of course, life is always happening. There are some big things on the horizon for me. I will be sailing this spring. I will feel well enough to enjoy said sailing. There are other things but I will save that news for later when it is happening.




I know it has taken longer than I thought to get to Florida, but next fall for sure. I am anxious to go. What is changing for me physically, is that, up until now I ran on will power. I was too miserable to really want to do anything. I just would not allow myself to give up. Now.....I want to do things. Body still fighting it. But I feel well enough to do it anyways.

You may have to live it to understand it. But there is a big difference.

Never say you won't do something. It was a late night last night and I am having trouble getting much done today. Vivian got sick and it took me over two hours to clean up our mess. Lots of pans, etc. It was not a piddling around time either. I was scrambling as quickly as I could. Yes...I could have left some mess to clean up in the morning, I just do not like waking up to a mess I made if it is not necessary.

On the high side. My fudge turned out pretty good, even though I had never made it and I was a small child the last time I actually saw it made. The first is my Dad's version of white penuche. Made the same as chocolate but with vanilla. We always called it vanilla as kids but when I got the recipe lately it was called white penuche..white penuche is made with brown sugar.

It turned out pretty well. Fudge appears to take some concentrating on keeping the temperatures correct. The chocolate fudge took two tries to get it right. Part of the problem was the baker's chocolate squares.

 after the first batch looked good, but was kind of weak in the chocolate flavor, I read the box and found that four of those equals one of the others. I also forgot to mix the nuts in. Apparently I never got them on top soon enough either. Even though I pushed them in, just about all fell off.

So I made another batch. This time more cocoa, watched the temperature better. Actually I watched it pretty close all three batches but it takes a small effort to keep it from overheating. I also remembered to stir in the walnuts. This batch turned out well enough to be able to tell people I made it ☺

 I would have thrown in some pictures of the cookie bake and decorate but that didn't get so far yet. I guess time will tell.

I really have boating on the brain. I have this wonderful sailboat that needs to be out sailing. wow!!! I must say, therapy is really helping. I have had to force myself to do things for so long. It is nice to be doing things and planning out of want instead of"must keep moving"! I am hoping to feel more like my old self by spring. Life is getting good again.

Merry Christmas!!!

 Gonna get busy here so unlikely to post again until after New Years.

Therapy is going well. This is the first winter since I got hurt in 2006 that I feel well enough to WANT to work on projects. Last winter at this time it was all I could do to pick up the breakfast dishes and clean myself up before Vivian got home from work. Not so this year!!

As my muscles, tendons and ligaments loosen up I find my energy levels escalating. One project after another. I am completely jacked out of shape with the thought of having my life back.

So much, in fact, I am starting boat projects this month. Dorade boxes are needed for ventilation on Mary Lee.

These are examples of dorade boxes. Funny how you can find plenty of picures but no measurements. I decided to use the dovetail jig and build some practice boxes out of cheap pine before using hardwood.

I used the length of a square box first. Decided that doing an angle on one side would be good

It needs a little tweeking to get it just right. I also need to adjust the measurements now  to the size I need. However, it is my first dovetailed box. Not bad for a start.

Vivian has cookie decorating planned for tomorrow. I am making fudge and possibly some Cinnamon rolls. 

But right now I need to scramble into the shower. I have therapy in about 40 minutes.

Christmas is creeping up. Naturally I had the decorations up within a few days of Thanksgiving being over. There are 650 lights on this tree. Daytime picture does not do it justice. Each 50 has it's own flasher. It is an ever changing light show. It is fake. It had permanent white lights. I have snips and ambition. It has multi-colored lights now.

 I have since changed out the angels lights. Vivian has had it many years. It had not been lit up in a long time. I got it going. The other night I reached up to check it. Found the old bulbs had burnt holes in the plastic base. Touched bulb and burnt my finger. Maybe that is one of the reasons for all the fires you heard about at one time. I ended up buying a short string of lights. Changed the last 8-10 bulbs to the yellow/gold ones and strung those into the angle. This tree picture is the old clear lights. Angel is now gold and goes much better with the tree.

 So you know I don't sit still very well. Yes....I have been working on projects.  This is an oil painting I found at Goodwill for under $3. It was in perfect condition so I decided it was the bargain of the day.

I took it home and built a frame out of scraps I had in the garage.

It took longer for the "stone finish" paint to dry than it took to build the frame.

No....that was not my only project this week. I had been planning a build-in sewing table for Vivian. I started it last week. I may have mentioned it last post. I finally figured out how I wanted to do it.

The mechanism that locks the folding leaf up was the most difficult to figure out. It had to be simple, strong and most important. Not metal.

By the time I had the rest of the table pieces ready to go, I had a plan.

You will notice the end of slotted piece. I put in a notch that drops over bolt as leaf is pulled out. Locking knob will not have to be over-tightened to hold leaf up. Just tight enough to keep notch from slipping off the bolt.

 Vivian seems as pleased with it as I am. A corner that had no purpose turned into a place where she can keep machine ready to use. It is quite solid. All oak except the slotted arm and the trim around white board is one inch thick. I used dovetails for frame. I bought a dovetail jig to use when building dorade boxes for Mary Lee. This was a good time to try it out.

 This was my first practice with pine scraps before I built sewing table frame

The hole next to dovetail below is screw hole from fastening it to wall. I took picture when I was putting varnish on it.

A friend in Wilmington said he would supply the mahogany if I would also build him some dorade boxes. Good plan. I will build a couple out of pine first for practice.

Of course Vivian had to sit at the sewing table to see how it "fit".

 She has had a shirt pinned and cut out for a while. She is just real busy and needs a machine set up so she can use it more readily. Got one!!!

So last but not least. Therapy. It takes a lot of effort to get ligaments to move again on a guy my size. Scott(therapist) seems up to the task.

It is painful...but I can already feel the difference this session made. Vivian goes to sessions with me on Saturdays. She takes the pictures.

So there you have it. Not everything that happened since the last post, but the highlights.

I hope everyone is gearing up for a great Christmas!!!

Another week has gone by. The last session in physical therapy hurt so bad I kind of just wanted to lay down for a few days. Yet....by yesterday I was not only feeling better but could, once again, move a little better. I had the mechanics of what has happened to me explained.
  In my uneducated laymen terms. I got hurt. The body puts callogen"?" Over the injured area for healing purposes. As time goes by, this and lactic acid build up over the area. In time it affects posture. Another callogen process takes place. My meager understanding is that it takes about 2 years for each cycle to complete. So getting all the ligaments, tendons and muscles worked loose is not much fun.

I know....not a great explaination, best I can do. I understand it enough for me,but like as not, I don't understand it enough to write a post on my blog well enough for everyone to understand. I guess if you know enough you could google it.

 Vivian is in Nashville, Tennessee for a convention. I guess the university does this every year. Anyways, we both have android tablets so we skyped this morning. Pretty nice way to say good morning long distance.

 Vivian just sent me this picture of her from the Wild Horse Saloon.

I was told I was not to buy anything for myself this close to Christmas. Nobody said I could not build what I needed.

 I built a holder for my tablet. I suppose it could have took an hour all together. I had it mostly together in 20 minutes but it needed tweeking. I had to add stops so it could not fall forward or slide out the side. I also added rubber pieces where needed and glued some fine sandpaper to the bottom so it can't slide off my lap. It works great.

One more project is started. Vivian needs a sewing table. I am building one out of that particle board with the plastic on the sides. I forget the name and don't really care if I remember. I am using the last piece I hope to ever own. I am edging it with oak and making a piece that folds up on the end.

I just got started. I have to build the frame. It will be fastened to the studs in a corner. I should have a completed picture next post. I suspect it will be pretty solid.